Lightweight CNC Plasma Cutting Machines
Light plasma cutting machines I call monoblock CNC plasma cutting machines with a cutting area up to 1.5x3 meters inclusive.
I have carried out several developments of machines with different technical solutions AutocutPro-LSLPP.6020 with CNC is designed for figured plasma cutting of metal up to 50 mm thick and up to 2x6 meters in size inclusive.
The machine has an extended gantry for use with a round or shaped pipe rotation module, which turns it into a full-fledged pipe cutter.
The machine complies with GOST 5614-74 "Machines for thermal cutting of metals. Types, main parameters and dimensions".
Noise-immune CNC allows the use of various types of plasma cutting machines - both with contact (pneumatic) ignition of the pilot arc, and with oscillatory ignition.

Станок плазменной резки AutocutPro-LSLPP
About Engineering
Engineering Date
2013-2018
Engineering Status
Completed, made in metal
Engineering Customer
different companies

Features of the development of light CNC plasma cutting machines

I have carried out several developments of machines with different technical solutions - for example, with the use of "rack/pinion" pairs along the XY axes and with the use of "toothed belt/pulley" pairs along the XY axes, and combined solutions. Both collapsible beds and welded ones (mounting welding during installation at the Customer).
In 2012-2015, the development of electronics (CNC) for most of the light plasma cutting machines was carried out by a talented software engineer Alexei Rybnik, while I developed the concepts of machines and performed 3D modeling of the mechanical part.
During development, the main requirements for the machine were simplicity, reliability, unpretentiousness and low manufacturing cost.
These requirements have been met.
Made on
Tilda