Installation for the impregnation of wooden beams
The installation for the impregnation of wooden beams is designed for impregnating the beam with an antiseptic or other technical solutions in a semi-automatic or manual mode.
The size of the submersible chamber (LxHxD) is 6.5x0.85x1.15 meters.
Lifting and lowering drive - cable or chain.
Laying of a bar - in front, by a fork loader.

Installation for the impregnation of wooden beams
Semi-automatic installation for the impregnation of wooden beams with antiseptic or other technical solutions
About Engineering
Engineering Date
2018
Engineering Status
Completed
Engineering Customer
"Stroysoyuz" LLC, St. Petersburg, Russia

Features of the development of installation for the impregnation of wooden beams

During development, the main requirements for the installation were simplicity, reliability, unpretentiousness, low manufacturing cost, the ability to work both in semi-automatic and manual modes.
At the request of the Customer, I developed two types - with a cable lift of a stand with a beam and with a chain lift. Rope lifting implied the use of the Customer's winch.
The unit must be equipped with a hydraulic accumulator (a container for storing excess solution) and a pump
Power - 380 V, 3-phase.
Made on
Tilda