Double column band saw for metal
Two-column band saw machine is designed for sawing metal profiles (beam, pipe, monolith) up to 400x500 mm in size (at an angle of 90 degrees), as well as for sawing a metal profile at an angle of 0-60 degrees.

Double column band saw
About Engineering
Engineering Date
Engineering Status
Engineering Customer
"ASTERCUT" LLC, St. Petersburg, Russia

Features of the development of a band saw

3D-modeling was carried out by the design engineer Bachkar Sergey Alexandrovich, I developed the basic concept of the machine, the technical solution of some units, and carried out the general development management.
During development, the main requirements for the machine were simplicity, reliability, unpretentiousness and low manufacturing cost.
These requirements have been met
Made on